CheckNoise stand is a magnetic anomaly detector, that can reliably detect mobile phones and otherelectronic devices on a moving person in stand version with three detectors
Checknoise hand is a magnetic anomaly detector, that can reliably detect mobile phones and otherelectronic devices on a moving person.
Ultrasound microphone interference device OfficeNoise is a powerful tool whose purpose is to prevent any undesired tapping and recording using various tapping and recording devices that take advantage of a microphone.
A phone that frees you not only from the world of apps and carriers, but also from the world of Google and data-hungry companies, allowing you to make secure and encrypted calls and messages to anyone.
This solar-recharged noise generator is designed to mask acoustic signal that can be sampled through windows.
Ultrasound microphone interference device RoomNoise is a powerful tool whose purpose is to prevent any undesired tapping and recording using various tapping and recording devices that take advantage of a microphone.
is a compact device specifically designed for protecting your phone from wiretapping, and jamming recording devices.. The primary purpose of the device is to protect small or confined spaces such as pockets, bags, cupboards, drawers, table top etc.
This product is intended to be used exclusively with the MyNoise product. When inserted into the stand, it creates a 360-degree circular ultrasound wave, which omnidirectionally interferes with the nearest sound recording device. At the same time, it provides protection against ceiling microphones.
WallNoise is designed for installation on the walls, the floors, the ceilings, and other building envelope surfaces, or for installation on technical wiring.
WiNoise Extender is an external drive that can be connected to a WiNoise device and brings extended capabilities and performance of the WiNoise device.
This solar-recharged noise generator is designed to mask acoustic signal that can be sampled through windows. It is suitable for protection against unwanted tapping or unauthorized recording on various types of spying devices, such as:
Magnetic Installation System – the device is equipped with magnets that hold it to two thin steel brackets that are stuck to a windowpane. This enables for easy cleaning of the windows and prevents any damage of the device with cleaners.
No electric power supply, no cables leading to the windowpane – the device is designed for solar power only. The solar panel is large enough to make the device functional not only in direct sunlight, but also on windows lit by diffused daylight. Fully charged Li-Ion battery is capable to provide for 1-2 months of operation without any sunlight.
Down-pressure Tuning – The correct pressure between the sensor and the surface of the windowpane is necessary to enable maximum transmission of the noise into the windowpane. Easy and precise fine-tuning of the downpressure to reach maximum acoustic efficiency helps achieve optimum output even for a very low noise input. This is very important for long-term operation.
Optional Charger – In spite of the fact that the device should be energetically self-sufficient for the whole season in areas of latitude of up to 55°, it is also possible to charge it with a usual micro-USB charger.
The device has in integrated switch-off timer that has a default setting of 1 hour.
The device is also equipped with a remote control that can be used for switching it on and off.
Type Description: WiNoise
Device Classification: Class III, SELV
Power Supply: Solar cell, USB charger 5V DC / 1A
Li-Pol internal battery: 1 x 3,7 V, 780 mAh
Maximum Consumption: 5 VA (external recharging)
Frequency Range of the Noise: 100 Hz – 4 kHz
Noise Generator Output: ~ 1,5 mW
Maximum Window Area Recommended: 4m2
Capacity Load of the Noise Output: 10nF max.
Operation Temperature Range: 0 – 45 ° C
Colour: anodized aluminium – silver
Dimensions: 160 x 70 x 10 mm
Intended to be used in a dry internal environment only
People in our company have 25 years of experience in the protection of acoustic data. Our goal is to maximize the efficiency of our products by continuously developing and testing new devices on the market in the area of wiretapping. Our unique technology is developed by top experts, making sure the parameters of our equipment are viable in worldwide scale.
DYN TEDES s.r.o.
Showroom:
Moskevská 86
110 00 Praha 10
Kanceláře:
Českolipská 400/20
Střížkov
190 00 Praha 9
PAKD group s.r.o.
Dlouhá 33
Kladno, 272 01
+420 602 306 799
pakdgroup@pakdgroup.cz
Security management s.r.o.
Černokostelecká 1367/29
100 00 Praha 10
+420 734 103 424
sec.man@security-management.cz
Caleum a.s.
Italská 438/36
130 00 Praha 3
+420 724 738 111
www.caleum.cz
markzoom